 |
loading
- Double cylinders hydraulic punch & shear machine
- Five independent stations for punch, shear, notcher, section cut
- Large punch table with multi-purpose bolster
- Removable table block for overhang channel / joist flange punching applications
- Universal die bolster, easy change punch holder fitted, punch adapters supplied
- Angle, round & square solid monoblock crop station
- Rear notching station, Low power inching and adjustable stroke at punch station
- Centralised pressure lubrication system
- Electric panel with overload protaction elements and ingetrated controls
- Safety movable foot pedal
- Double cylinders hydraulic punch & shear machine
- Five independent stations for punch, shear, notcher, section cut
- Large punch table with multi-purpose bolster
- Removable table block for overhang channel / joist flange punching applications
- Universal die bolster, easy change punch holder fitted, punch adapters supplied
- Angle, round & square solid monoblock crop station
- Rear notching station, Low power inching and adjustable stroke at punch station
- Centralised pressure lubrication system
- Electric panel with overload protaction elements and ingetrated controls
- Safety movable foot pedal
| Model | Q35Y-12 |
| Punching Pressure (T) | 35 |
| Max. cutting thickness of sheet plates (mm) | 12 |
| Material strength (N/mm²) | ≤450 |
| Angle of Shear (°) | 7° |
| Flat bar shearing (T*W)(mm) | 12*300 |
| Max. length of cylinder stroke (mm) | 35 |
| Trips frequency (times/min) | 10-18 |
| Depth of throat (mm) | 115 |
| Max. punching diameter (mm) | 25 |
| Motor power (KW) | 4 |
| Overall dimensions (L*W*H)(mm) | 950*550*1800 |
| Weight(kg) | 1200 |
| Steel category | Round Bar | Square Bar | Equal Angle | T Bar | I-iron | Channel steel | |||
| 90° Shearing | 45° Shearing | 90° Shearing | 45° Shearing | ||||||
| Q35Y-12 | 35 | 30*30 | 100*100*8 | | 100*55 | | 100*55 | 100*48 | |
| Model | Q35Y-16 |
| Punching Pressure (T) | 60 |
| Max. cutting thickness of sheet plates (mm) | 16 |
| Material strength (N/mm²) | ≤450 |
| Angle of Shear (°) | 7° |
| Flat bar shearing (T*W)(mm) | 16*250 8*400 |
| Max. length of cylinder stroke (mm) | 80 |
| Trips frequency (times/min) | 11-20 |
| Depth of throat (mm) | 300 |
| Max. punching diameter (mm) | 26 |
| Motor power (KW) | 5.5 |
| Overall dimensions (L*W*H)(mm) | 1700*750*1800 |
| Weight(kg) | 1800 |
| Steel category | Round Bar | Square Bar | Equal Angle | T Bar | I-iron | Channel steel | |||
| 90° Shearing | 45° Shearing | 90° Shearing | 45° Shearing | ||||||
| Q35Y-16 | 45 | 40*40 | 125*125*12 | 70*70*8 | 120*120*12 | 60*60*8 | 126*74*5 | 126*53*5.5 | |
| Model | Q35Y-20 |
| Punching Pressure (T) | 90 |
| Max. cutting thickness of sheet plates (mm) | 20 |
| Material strength (N/mm²) | ≤450 |
| Angle of Shear (°) | 8° |
| Flat bar shearing (T*W)(mm) | 20*330 10*480 |
| Max. length of cylinder stroke (mm) | 80 |
| Trips frequency (times/min) | 12-20 |
| Depth of throat (mm) | 355 |
| Max. punching diameter (mm) | 30 |
| Motor power (KW) | 7.5 |
| Overall dimensions (L*W*H)(mm) | 1950*900*1950 |
| Weight(kg) | 2400 |
| Steel category | Round Bar | Square Bar | Equal Angle | T Bar | I-iron | Channel steel | |||
| 90° Shearing | 45° Shearing | 90° Shearing | 45° Shearing | ||||||
| Q35Y-20 | 50 | 50*50 | 140*140*12 | 70*70*10 | 140*70*12 | 70*70*10 | 200*102*9 | 160*60*6.5 | |
| Model | Q35Y-25 |
| Punching Pressure (T) | 115 |
| Max. cutting thickness of sheet plates (mm) | 25 |
| Material strength (N/mm²) | ≤450 |
| Angle of Shear (°) | 8° |
| Flat bar shearing (T*W)(mm) | 25*330 16*600 |
| Max. length of cylinder stroke (mm) | 80 |
| Trips frequency (times/min) | 10-18 |
| Depth of throat (mm) | 400 |
| Max. punching diameter (mm) | 35 |
| Motor power (KW) | 7.5 |
| Overall dimensions (L*W*H)(mm) | 2355*960*2090 |
| Weight(kg) | 4000 |
| Steel category | Round Bar | Square Bar | Equal Angle | T Bar | I-iron | Channel steel | |||
| 90° Shearing | 45° Shearing | 90° Shearing | 45° Shearing | ||||||
| Q35Y-25 | 60 | 50*50 | 160*160*14 | 80*80*7 | 160*160*14 | 80*80*10 | 200*102*9 | 200*75*9 | |
| Model | Q35Y-30 |
| Punching Pressure (T) | 145 |
| Max. cutting thickness of sheet plates (mm) | 30 |
| Material strength (N/mm²) | ≤450 |
| Angle of Shear (°) | 8° |
| Flat bar shearing (T*W)(mm) | 30*335 20*600 |
| Max. length of cylinder stroke (mm) | 80 |
| Trips frequency (times/min) | 8-16 |
| Depth of throat (mm) | 600 |
| Max. punching diameter (mm) | 38 |
| Motor power (KW) | 11 |
| Overall dimensions (L*W*H)(mm) | 2800*1100*2500 |
| Weight(kg) | 7500 |
| Steel category | Round Bar | Square Bar | Equal Angle | T Bar | I-iron | Channel steel | |||
| 90° Shearing | 45° Shearing | 90° Shearing | 45° Shearing | ||||||
| Q35Y-30 | 65 | 55*55 | 180*180*16 | 80*80*10 | 180*180*16 | 80*80*10 | 280*124*10.5 | 280*86*11.5 | |
| Model | Q35Y-40 |
| Punching Pressure (T) | 200 |
| Max. cutting thickness of sheet plates (mm) | 40 |
| Material strength (N/mm²) | ≤450 |
| Angle of Shear (°) | 8° |
| Flat bar shearing (T*W)(mm) | 40*335 30*600 |
| Max. length of cylinder stroke (mm) | 100 |
| Trips frequency (times/min) | 8-16 |
| Depth of throat (mm) | 600 |
| Max. punching diameter (mm) | 40 |
| Motor power (KW) | 18.5 |
| Overall dimensions (L*W*H)(mm) | 2800*1100*2500 |
| Weight(kg) | 6400 |
| Steel category | Round Bar | Square Bar | Equal Angle | T Bar | I-iron | Channel steel | |||
| 90° Shearing | 45° Shearing | 90° Shearing | 45° Shearing | ||||||
| Q35Y-40 | 70 | 60*60 | 200*200*18 | 80*80*10 | 200*200*18 | 80*80*10 | 280*124*10.5 | 300*89*11.5 | |
| Model | Q35Y-12 |
| Punching Pressure (T) | 35 |
| Max. cutting thickness of sheet plates (mm) | 12 |
| Material strength (N/mm²) | ≤450 |
| Angle of Shear (°) | 7° |
| Flat bar shearing (T*W)(mm) | 12*300 |
| Max. length of cylinder stroke (mm) | 35 |
| Trips frequency (times/min) | 10-18 |
| Depth of throat (mm) | 115 |
| Max. punching diameter (mm) | 25 |
| Motor power (KW) | 4 |
| Overall dimensions (L*W*H)(mm) | 950*550*1800 |
| Weight(kg) | 1200 |
| Steel category | Round Bar | Square Bar | Equal Angle | T Bar | I-iron | Channel steel | |||
| 90° Shearing | 45° Shearing | 90° Shearing | 45° Shearing | ||||||
| Q35Y-12 | 35 | 30*30 | 100*100*8 | | 100*55 | | 100*55 | 100*48 | |
| Model | Q35Y-16 |
| Punching Pressure (T) | 60 |
| Max. cutting thickness of sheet plates (mm) | 16 |
| Material strength (N/mm²) | ≤450 |
| Angle of Shear (°) | 7° |
| Flat bar shearing (T*W)(mm) | 16*250 8*400 |
| Max. length of cylinder stroke (mm) | 80 |
| Trips frequency (times/min) | 11-20 |
| Depth of throat (mm) | 300 |
| Max. punching diameter (mm) | 26 |
| Motor power (KW) | 5.5 |
| Overall dimensions (L*W*H)(mm) | 1700*750*1800 |
| Weight(kg) | 1800 |
| Steel category | Round Bar | Square Bar | Equal Angle | T Bar | I-iron | Channel steel | |||
| 90° Shearing | 45° Shearing | 90° Shearing | 45° Shearing | ||||||
| Q35Y-16 | 45 | 40*40 | 125*125*12 | 70*70*8 | 120*120*12 | 60*60*8 | 126*74*5 | 126*53*5.5 | |
| Model | Q35Y-20 |
| Punching Pressure (T) | 90 |
| Max. cutting thickness of sheet plates (mm) | 20 |
| Material strength (N/mm²) | ≤450 |
| Angle of Shear (°) | 8° |
| Flat bar shearing (T*W)(mm) | 20*330 10*480 |
| Max. length of cylinder stroke (mm) | 80 |
| Trips frequency (times/min) | 12-20 |
| Depth of throat (mm) | 355 |
| Max. punching diameter (mm) | 30 |
| Motor power (KW) | 7.5 |
| Overall dimensions (L*W*H)(mm) | 1950*900*1950 |
| Weight(kg) | 2400 |
| Steel category | Round Bar | Square Bar | Equal Angle | T Bar | I-iron | Channel steel | |||
| 90° Shearing | 45° Shearing | 90° Shearing | 45° Shearing | ||||||
| Q35Y-20 | 50 | 50*50 | 140*140*12 | 70*70*10 | 140*70*12 | 70*70*10 | 200*102*9 | 160*60*6.5 | |
| Model | Q35Y-25 |
| Punching Pressure (T) | 115 |
| Max. cutting thickness of sheet plates (mm) | 25 |
| Material strength (N/mm²) | ≤450 |
| Angle of Shear (°) | 8° |
| Flat bar shearing (T*W)(mm) | 25*330 16*600 |
| Max. length of cylinder stroke (mm) | 80 |
| Trips frequency (times/min) | 10-18 |
| Depth of throat (mm) | 400 |
| Max. punching diameter (mm) | 35 |
| Motor power (KW) | 7.5 |
| Overall dimensions (L*W*H)(mm) | 2355*960*2090 |
| Weight(kg) | 4000 |
| Steel category | Round Bar | Square Bar | Equal Angle | T Bar | I-iron | Channel steel | |||
| 90° Shearing | 45° Shearing | 90° Shearing | 45° Shearing | ||||||
| Q35Y-25 | 60 | 50*50 | 160*160*14 | 80*80*7 | 160*160*14 | 80*80*10 | 200*102*9 | 200*75*9 | |
| Model | Q35Y-30 |
| Punching Pressure (T) | 145 |
| Max. cutting thickness of sheet plates (mm) | 30 |
| Material strength (N/mm²) | ≤450 |
| Angle of Shear (°) | 8° |
| Flat bar shearing (T*W)(mm) | 30*335 20*600 |
| Max. length of cylinder stroke (mm) | 80 |
| Trips frequency (times/min) | 8-16 |
| Depth of throat (mm) | 600 |
| Max. punching diameter (mm) | 38 |
| Motor power (KW) | 11 |
| Overall dimensions (L*W*H)(mm) | 2800*1100*2500 |
| Weight(kg) | 7500 |
| Steel category | Round Bar | Square Bar | Equal Angle | T Bar | I-iron | Channel steel | |||
| 90° Shearing | 45° Shearing | 90° Shearing | 45° Shearing | ||||||
| Q35Y-30 | 65 | 55*55 | 180*180*16 | 80*80*10 | 180*180*16 | 80*80*10 | 280*124*10.5 | 280*86*11.5 | |
| Model | Q35Y-40 |
| Punching Pressure (T) | 200 |
| Max. cutting thickness of sheet plates (mm) | 40 |
| Material strength (N/mm²) | ≤450 |
| Angle of Shear (°) | 8° |
| Flat bar shearing (T*W)(mm) | 40*335 30*600 |
| Max. length of cylinder stroke (mm) | 100 |
| Trips frequency (times/min) | 8-16 |
| Depth of throat (mm) | 600 |
| Max. punching diameter (mm) | 40 |
| Motor power (KW) | 18.5 |
| Overall dimensions (L*W*H)(mm) | 2800*1100*2500 |
| Weight(kg) | 6400 |
| Steel category | Round Bar | Square Bar | Equal Angle | T Bar | I-iron | Channel steel | |||
| 90° Shearing | 45° Shearing | 90° Shearing | 45° Shearing | ||||||
| Q35Y-40 | 70 | 60*60 | 200*200*18 | 80*80*10 | 200*200*18 | 80*80*10 | 280*124*10.5 | 300*89*11.5 | |
