KCVL VERTICAL TYPE CNC GROOVING MACHINE
All steel plate welded structure, the whole machine is tempered to eliminate internal stress, and has good rigidity and stability;
The operation control panel is under the cantilever on the front of the fuselage. Simple operation, easy to learn and understand;
This machine is equipped with Japanese MITSUBISHI numerical control system, closed-loop servo system, and accurate positioning;
The tool post is driven by imported ball screws and driven by Japan's MITSUBISHI Japan's Mitsubishi servo motor to achieve high speed and high torque;
The appliance is imported from France Snyder.
Hydraulic parts are from American VICKERS and Japanese YUKEN series.
High-precision rear tube position, driven by servo motor, imported high-speed screw and linear guide.
The servo motor is used for accurate positioning and high machining accuracy.
The entire operating system of the machine is a precise electro-pneumatic hydraulic combination, which is easy to operate, sensitive in action, high in efficiency, low in noise, and free of environmental pollution.
Technical Parameters
| NO. | Item | Parameter | Unit | ||
| 1 | Grooving thickness-stainless steel plate | 0.3-6 | mm | ||
| 2 | Grooving length | 500-4200 | mm | ||
| 3 | Grooving width | 9-1600 | mm | ||
| 4 | Press cylinder | 16 | / | ||
| 5 | Clamp | 15 | / | ||
| 6 | Maximum travel of X axis | 4400 | mm | ||
| 7 | X axis servo motor power | 5 | kW | ||
| 8 | X axis maximum moving speed | 90 | m/min | ||
| 9 | Y-axis maximum travel (tool post lift) | 15 | mm | ||
| 10 | Y-axis servo motor power | 0.4 | kW | ||
| 11 | Y axis maximum moving speed | 1.5 | m/min | ||
| 12 | Z axis maximum travel | 1600 | mm | ||
| 13 | Z-axis servo motor power | 0.6 | kW | ||
| 14 | Z axis maximum moving speed | 30 | m/min | ||
| 15 | Table height | 750 | mm | ||
| 16 | Main motor power (230V-50Hz) | 2.2 | HP | ||
| 17 | Fuel tank capacity | 35 | L | ||
| 18 | Machine weight | 13600 | KG | ||
| 19 | Machine dimensions (L×W ×H) | 5200×2650×2380 | mm | ||
| 20 | Grooving thickness-stainless steel plate | 0.3-6 | mm | ||
Machine maintenance
This series of sheet metal V-groove planers should be regularly filled with lubricating oil. See the table below for the lubrication parts and lubrication intervals of the machine:
| Lubrication area | Lubrication cycle | Lubricant type |
| Guides and sliders for tool feed systems | once per day | Motor oil |
| Guide rails and sliders on planer beams | once per week | Grease |
| Screw and nut on the rear tube | once per week | Grease |
| Screw and nut on planer beam | once per week | Grease |
| Screw and nut of tool feed system | once per week | Grease |
Detail Pictures
The KCVL VERTICAL TYPE CNC GROOVING MACHINE warranty period is 2 years, will run since bill of lading date, if the accessories appear damaged during the warranty period, except for damage caused by improper human handling, we can replace them for the buyer for free.
Front
Back
Detail Pictures
Operating System Panel
The top right corner of the machine is equipped with a control panel, which is equipped with various switch buttons, indicators and touch display, as shown in the figure:
Random Equipment
Equipped with Japanese MITSUBISHI servo controller and servo motor drive.
Equipped with Taiwan silver ball screw and linear guide.
Spring-loaded independent hydraulic pressure cylinder and clamp are used for the front pressure and the rear pipe position.
Equipped with two movable pressure cylinders, which is convenient for short material grooving.
Planer lighting.
US VICKERS and Japan YUKEN hydraulic system.
5 pieces of stainless steel front support, each with a length of 500mm.
Foot switch.
One random tool box, the box includes: six internal wrenches (Ø8 / Ø10 / Ø12 / Ø13 / Ø14 / Ø16 / Ø17 / Ø18 / Ø19); one each of "-" and "+" screwdrivers; grease gun One; two jaw positioning blocks; one knife mounting template; one set of cutters (size: 6 * 12 * 200).
Basic Skills
With full-automatic, single-action, manual cycle, Chinese and English switching functions.
The grooving speed can be arbitrarily adjusted within a certain range.
Repeated positioning accuracy of rear pipe position: +/- 0.03mm.
For more details, please refer to the manual.
